Tub Liners


Colors to Choose From:



Durable acrylic will not chip, dent, crack, or peel and is completely colorfast! Choose from Almond, White, Biscuit, Gray, Pewter or Pearl.

Winged Form Skirt

The winged form skirt is thermoformed from a .280” thick acrylic sheet and has an 1 1/2” offset.

Curved Form Skirt

The curved form skirt tub is thermoformed from a .280” thick sheet of acrylic and has a 2 3/4” offset. This skirt is used on case tubs with or without the serpentine bottom

Straight Skirt

A straight skirt tub is thermoformed from a .270” thick sheet of acrylic.

Classic Form Skirt

The classic form skirt tub is thermoformed from a .280” thick sheet of acrylic and has a 1 1/2” offset.

PIA Form Skirt

The classic form skirt tub is thermoformed from a .280” thick sheet of acrylic and has a 1 1/2” offset.

Wave Skirt

A wave skirt tub is thermoformed from a .280” thick sheet of acrylic. This skirt is similar to a straight skirt but has a wave pattern.

Accessory: Slip Resistant Bottom

All bathliners are manufactured with an integral slip resistant bottom.

Accessory: Large Endcap

The large encap is 25" tall and 33" wide. It's used on two wall tubs as a skirt on the side of the tub.

Accessory: Small Endcap

The small endcap is 2 1/2" x 2 1/2" by 18 1/2" tall. It is used on the end of the tub when the skirt protrudes out further than the wall.

Accessory: Decorative Skirt

The decorative skirt is used on the front of straight skirted tubs as decoration.

Accessory: Test Shell

Test shells are used to check for proper fit when our factory questions tub identification.

Accessory: Screw In Drain

Screw in drains for tubs come in brass, chrome and white. All drains are push type.

Accessory: Overflows

The overflow kit includes a one-hole overflow plate with a matching 2 1/4" screw and crossbar.

Accessory: Wide Flange Drain

A wide flange drain is used when the drain hole is cut too large. They are 1/4" larger in diameter and come in #305, 301 and 309. Keep a set on your truck!

Accessory: Drain Adapters

Drain adapters are brass bushings that screw into the drain shoe to adapt a drain to that specific drain shoe.

 

 

9 Tips